tef.eu ‑ globalfire.pt Manufacturers of Fire Detection Equipment TEF‑GFE ‑ 2023 TECHNICAL SPECIFICATIONS SUPPLY VOLTAGE CURRENT - QUIESCENT CURRENT - DEVICE IN ALARM CABLE SIZE MAX. RECOMMENDED PER LOOP COLOUR / CASE MATERIAL PROTECTION OPERATING TEMPERATURE MAX. HUMIDITY DIMENSIONS WEIGHT Loop Powered 20-30 V DC 500 uA - 650 uA for GFE-MCPE‑AI 3.1 mA - Yellow LED ON only applies to GFE-MCPE‑AI 0.5-2.5 mm² 30 GFE-MCPE‑A or GFE-MCPE‑AI Red / ABS & Clear/ PC ‑ Flame Retardant 94 V0 IP24D ‑10ºC to 55ºC 95% RH Non‑Condensing 92.6 (W) x 92.6 (H) x 60.1 (D) mm 152 g ORDER CODE GFE‑MCPE‑A Addressable Manual Call Point The GFE‑MCPE‑A is an Analogue Addressable Manual Call Point, designed and manufactured to comply with EN54‑ 11, compatible with all GFE Addressable Control panels. With its enhanced communications mechanism the typical response time, when in alarm, is approximately one second, depending on the number of call points connected to the device loop. There is also a version incorporating a Loop Isolator. A bi‑colour LED flashes Green when the unit is interrogated by the control panel and is illuminated Red when in Alarm. The command to illuminate the Red LED is emitted by the control panel in response to activation of the individual call point thus confirming that the Alarm signal has been received at the control panel. The individual address, up to 125, of each call point is set via an eight way DIL switch. The unit is supplied complete with a hinged flap which protects the trigger element from accidental activation and reduces malicious activations as two actions are required in order to activate the device. This unit can be both surface and flush mounted and it can be easily reset using the supplied key after activation. ADDRESSABLE MANUAL CALL POINT ADDRESSABLE MANUAL CALL POINT WITH LOOP ISOLATOR GFE-MCPE‑A GFE-MCPE‑AI 1328-CPR-0374 1328‑CPR‑0375
RkJQdWJsaXNoZXIy MTY2MjU=