tef.eu ‑ globalfire.pt Manufacturers of Fire Detection Equipment TEF‑GFE ‑ 2023 3 I/O PLUS Addressable Triple Input/Output Module The 3 I/O PLUS Modules are fully monitored loop powered devices which permit the interfacing of third party equipment with the Fire Alarm Control panel using normally open dry contact connections. Each module can be fitted with a maximum of 3 inputs and 3 outputs. The connection to each input is monitored for fault (open or short‑ circuit) and Alarm conditions. The interface is used to monitor the contacts of an external system which must be interfaced to the Fire Alarm System, for example a Flow Switch in a sprinkler system to indicate if the sprinklers have been activated or extinguishant level monitoring in Gas Extinguishing Systems, etc. Module is provided with a loop short‑circuit isolator and with up to 3 voltage free single pole change over relay outputs. The output relays are always powered directly from the detection loop. It is not required to use an external 24 V DC power supply. Relay operation is confirmed by an onboard Red LED. A 8 way D.I.L. switch is provided to configure the module's address. This value can be set in the range 1 to 125. The following programmable functions are available꞉ Input Activation Mode, Delayed Input Alarm Activation, Output Delayed Activation. Key Features Fast Activation Response Loop Powered Status LEDs for each I/O and O/P Low Power Consumption Module features an integral short‑circuit loop isolator TECHNICAL SPECIFICATIONS ORDER CODE 3 I/O PLUS - 1 CHANNEL 3 I/O PLUS - 2 CHANNEL 3 I/O PLUS - 3 CHANNEL SUPPLY VOLTAGE LOOP CURRENT ‑ QUIESCENT (I )Q LOOP CURRENT ‑ ALARM LOOP CURRENT ‑ SHORT‑CIRCUIT LOOP CURRENT ‑ OPEN CIRCUIT LOOP CURRENT ‑ OUTPUT OUTPUT RELAY CONTACT RATING MAX. CABLE SIZE CASE MATERIAL OPERATING TEMPERATURE MAX. HUMIDITY DIMENSIONS WEIGHT ADDRESSABLE SINGLE I/O MODULE - W/ ISOLATOR - W/ DUAL GANG BOX ADDRESSABLE DOUBLE I/O MODULE - W/ ISOLATOR - W/ DUAL GANG BOX ADDRESSABLE TRIPLE I/O MODULE - W/ ISOLATOR - W/ DUAL GANG BOX Loop Powered - 17 V to 30 V DC 1.4 mA (1 ch.) - 1.5 mA (2 ch.) - 1.6 mA (3 ch.) IQ+ 1.2 mA for each I/P in alarm IQ+ 1.4 mA max. IQ+ 1.0 mA max. IQ+ 1.1 mA for each O/P activated 2 A 30 V DC / 0.5 A 125 V AC 2.5 mm² ABS -10ºC to 50ºC 95% RH Non-Condensing 90 (L) x 150 (W) x 32 (H) mm 216 g - boxed 1328-CPR-0542 1328‑CPR‑0543 1328‑CPR‑0544
RkJQdWJsaXNoZXIy MTY2MjU=